Next in sealants, glues, hemostats…and why?

From July 2016 published Report #S290.

The need for surgical sealants, glues, and hemostats is directly related to the clinical caseload and procedure volumes, while product choice is dependent upon the surgeon’s training and experience with the products, the particular situation, and product availability. Availability is influenced by several factors. For example, must the product be prepared before use, or is it ready to use off the shelf? Is it refrigerated, requiring warming prior to use, or is the product able to be stored at room temperature? Availability also depends on whether the hospital or healthcare facility will stock the product, which in turn depends on the product’s cost and whether it fits into the facility’s budget and formulary. Sealants, glues and hemostats are used about 25% of the time in many (but not all) procedures, since sutures remain the most familiar and least expensive products for wound closure. However, the products addressed in this report could well find use in over 100 million procedures globally.

Here are six key trends we see in the global market next in surgical sealants, glues, hemostats:

  1. Aggressive development of products (including by universities, startups, established competitors), regulatory approvals, and new product introductions continues in the U.S., Europe, and Asia/Pacific (mostly Japan, Korea) to satisfy the growing volume of surgical procedures globally.
  2. Rapid adoption of sealants, glues, and hemostats in China will drive much of the global market for these products, but other nations in the region are also big consumers, with more of the potential caseload already tapped than the rising economic China giant. Japan is a big developer and user of wound product consumer. Per capital demand is also higher in some countries like Japan.
  3. Flattening markets in the U.S. and Europe (where home-based manufacturers are looking more at emerging markets), with Europe in particular focused intently on lowering healthcare costs.
  4. The M&A, and deal-making that has taken place over the past few years (Bristol-Myers Squibb, The Medicines Company, Cohera Medical, Medafor, CR Bard, Tenaxis, Mallinckrodt, Xcede Technologies, etc.) will continue as market penetration turns to consolidation.
  5. Growing development on two fronts: (1) clinical specialty and/or application specific product formulation, and (2) all purpose products that provide faster sealing, hemostasis, or closure for general wound applications for internal and external use.
  6. Bioglues already hold the lead in global medical glue sales, and more are being developed, but there are also numerous biologically-inspired, though not -derived, glues in the starting blocks that will displace bioglue shares. Nanotech also has its tiny fingers in this pie, as well.

See Report #S290, “Worldwide Sealants, Glues, and Hemostats Markets, 2015-2022”.

Wounds looking for closure: Untapped potential for sealants, glues, hemostats

Today’s surgeon has a broad range of products from which to choose for closing and sealing wounds. These include sutures, stapling devices, vascular clips, ligatures, and thermal devices, as well as a wide range of topical hemostats, surgical sealants and glues.

However, surgeons still primarily use sutures for wound closure and securement—sutures are cheap, familiar and work most of the time. Now, in addition to reaching for a stapling device, the surgeon must frequently decide at what point to augment or replace the commonly used items in favor of other products, which product is best for what procedure or condition, how much to use, and ease of use in order to achieve optimal patient outcomes. Because of budget pressures, the surgeon must also consider price when selecting a product. Of course in the USA, the product must also be FDA-approved, although the surgeon still has the choice of using a product off-label.

In the areas of sealants, hemostats and glues, there is room for both improvement and additional products.  There are a number of products already on the market, but the fact is that there is no one product that meets all needs in all situations and procedures. There are few products that stand out from the rest, apart, perhaps, from DermaBond® and BioGlue®. There are unmet needs, and companies having the necessary technology, or which may acquire and further develop the technology, can enter this market and launch novel items. These products have yet to significantly tap the potential for wound management and medical/surgical procedures.

Note: Log10 scale; Chronic wounds includes pressure, venous/arterial and diabetic ulcers.

Source: MedMarket Diligence, LLC; Report #S290.

Sealants, Fibrin and Others

Numerous variants of fibrin sealant exist, including autologous products. “Other” sealants refers to thrombin, collagen & gelatin-based sealants.

Fibrin sealants are used in the US in a wide array of applications; they are used the most in orthopedic surgeries, where the penetration rate is thought to be 25-30%. Fibrin sealants can, however, be ineffective under wet surgical conditions. The penetration rate in other surgeries is estimated to be about 10-15%.

Fibrin-based sealants were originally made with bovine components. These components were judged to increase the risk of developing bovine spongiform encephalopathy (BSE), so second-generation commercial fibrin sealants (CSF) avoided bovine-derived materials. The antifibrinolytic tranexamic acid (TXA) was used instead of bovine aprotinin. Later, the TXA was removed, again due to safety issues. Today, Ethicon’s (JNJ) Evicel is an example of this product, which Ethicon says is the only all human, aprotinin free, fibrin sealant indicated for general hemostasis. Market growth in the Sealants sector is driven by the need for improved biocompatibility and stronger sealing ability—in other words, meeting the still-unsatisfied needs of physician end-users.

High Strength Medical Glues

Similar to that of sealants, the current market penetration of glues in the US is thought to be about 25% of eligible surgeries. There are several strong points in favor of the use of medical glues: their use can significantly reduce healthcare costs, for example by reducing time in the surgical suite, reducing the risk of a bleed, which may mean a return trip to the OR, and general ease of use. Patients seem to prefer the glues over receiving sutures for an external wound, as glues can provide a suture-free method of closing wounds. In addition, if glues are selected over sutures, the physician can avoid the need (and cost) of administering local anesthesia to the wound site.

Hemostats

Hemostats are normally used in surgical procedures only when conventional bleeding control methods are ineffective or impractical. The hemostat market offers opportunities as customers seek products that better meet their needs. Above and beyond having hemostats that are effective and reliable, additional improvements that they wish to see in hemostat products include: laparoscopy-friendly; work regardless of whether the patient is on anticoagulants or not; easy to prepare and store, with a long shelf life; antimicrobial; transparent so that the surgeon continues to have a clear field of view; and non-toxic; i.e. preferably not made from human or animal materials.


Drawn from, “Worldwide Markets for Medical and Surgical Sealants, Glues, and Hemostats, 2015-2022:  Established and Emerging Products, Technologies and Markets in the Americas, Europe, Asia/Pacific and Rest of World.” Report #S290.